100% Pp Polypropylene Meltblown Cloth , Melt Blown Material Medical Grade

100% Pp Polypropylene Meltblown Cloth , Melt Blown Material Medical Grade

100%pp polypropylene face mask medical grade material filter meltblown nonwoven fabric

100% PP Polypropylene General Description

1. Meltblown technology is one of the most effective ways to make very fine, highly efficient filter media. A100% eco-friendly recycl air filter polypropylene wipe nonwoven fabric meltblown has a diameter of less than 10µm, many times finer than a human hair, which has a diameter of 120µm, or a cellulose fiber of about 50µm.

2. The raw material is a thermo-plastic synthetic material which is melted and forced through an extruder consisting of a very large number of tiny nozzles. Immediately after exiting the nozzles, the individual filaments are blown by hot air in the same direction while still in their semi-melted state, extending them and creating very fine, endless fibers, within a few milliseconds.

3. Using this dry-laid process, Neenah Gessner can produce media with weights from 10 – 300g/m².

4. Alternatively, the melt blown can be directly applied to a carrier media [cellulose or spunbond , producing combination media in one step.

Additional there are many options to choose: fiber diameter, thickness, grammage, FDA-conformity, haptic surface design, resistance to chemicals, heat resistance, compostability, dust loading, low shedding surface polarity, UV-Protection, antibacterial, colors, elctrocharging and antistatics

Product Features

1. Heng Kang supplies filter material for face masks and respirators. The main applications are for surgical use and labor-protective use. Our meltblown for surgical face masks meet EN14683, BFE 99% above, too.

2. The meltblown material for dust proof respirators meets European EN 149:2001 and American NIOSH42 CFR-84. They can be used to manufacture face mask or respirators for the grades as European standard FFP1, FFP2, FFP3, and the US Standard N95, N99, N100, R95, R99. Our meltblown has the special characteristics of high efficiency, light weight, low resistance, long-lasting bacteria filtration, and high penetration resistance.

3. These kinds of meltblown are all eco-friendly, breathable, anti-tear, water proof, anti-bacterial, anti-pull, mothproof. These medical mask filter materials conform to the standard EN14683:2003, ASTM F2100-2004, EN14683:2014, and will be tested by TSI 8130.

4. We have been exported to Russia, Taiwan, Thailand, Malaysia, Indonesia, Vietnam, Canada, Pakistan, Singapore, Portuguesa, Spain, Brazil, etc. The products can be produced according to the customer specified index.

Product Detail

Detailed picture